Configuring trackers

‎

Voluum

Procedure:

1. In the affiliate network section, create a Juddy.biz system and disable the Accept duplicate postbacks parameter (to disable receiving data on unsubscriptions and rebills).
2. Go to the Voluum tracker panel and go to Settings -> Setup.
3. Copy the PostBack URL and change it as follows: http://XXXX.voluumtrk2.com/postback?cid= {sub_id} (where xxxx is your ID in the tracker).
4. Go to the Streams section in our system and select (or create) a stream that will work with Voluum.
5. Enter the resulting link in the PostBack URL form. In the Subid name form, specify the cid

Everything. All subscription notifications from Juddy will go to the Voluum tracker.

Binom

To set up Binom for Juddy, you need to fill in several cards.

1. Go to the TrafficSources tab and add your traffic source by clicking on the + Create button. It is enough to fill in only the Name field.
2. Go to the AffiliateNetwork tab and add your affiliate program information by clicking on the + Create button. Also, just fill in the Name field.
3. Add an offer by going to the Offers tab and clicking on the + Create button. Here you need to set the Name, URL fields (? Sub_id = {clickid} is added to the link generated in Juddy to send a unique click id to our system), Aff.network. Also, optionally, you can specify the country in the Country field and the payment in case of a successful transaction in the Payouts field (in USD).
   

1. Create a campaign by going to the Campaigns tab and clicking the + Create button. Here you need to fill in the following fields in the Main Options section:
2. * Name - any company name;
3. * TrafficSource is the source of your traffic. It was filled in in the tab of the same name;
4. * CPC / CPM ($) - cost of a click on the source in dollars (to track information in the tracker);
5. * Domain - you need to select your domain where Binom is used. If your domain is not listed, add it in the Domains section of the menu.
6. In the Default section, in the Lading Page subsection, press the + Direct button (thus indicating to the tracker that the traffic from the tracker will go directly to the offer). In the Offers subsection, select the previously created offer. When you save, your link will appear in the Campaign URL field, by which you need to send traffic to the tracker from the source.
   

1. In Juddy, in the settings of the stream through which the traffic will go, specify the postback of the form http://yourdomain.ru/click.php?cnv_id= {sub_id }&payout= {income}.
   

The setup is complete.

AdsBridge

To track data in the AdsBridge tracker, you need to fill in several sections:

1. 'Traffic source' . Go to the Traffic source - Create traffic source section and enter any name in the Traffic source name field. Click the Save button.
2. 'Affiliate networks' . Go to the Affiliate Networks section:
3. * enter a name for the affiliate network in the Affiliate network name field. In our case, Juddy.biz;
4. * check the box Use one tracking Sub ID in all offers, and in the field below, enter the value of our parameter for the unique id of the click - sub_id;
5. * in the S2S postback field, you can write a postback URL for yourself - http://ykgnm.ab4all.com/trackpixel/track?tid= {sub_id }&amt= {income}. This postback will be used in the stream settings on our system.

1. Offers. Go to Offers - Create offer.
2. * Vertical. Choosing the subject of the offer. In our case, Dating. Depending on the chosen theme in Juddy, we also select the theme in the tracker;
   • Name. In the Name field - any name for the offer;
   • Link. In this field, you enter the direct link that you generated in the LC.
3. * Affiliate network. In the drop-down list, you must select the affiliate network added earlier in paragraph 2.
4. * Payment. If the payout amount for the offer is known in advance, for example, you have chosen landing pages with the same rebill, or you are pouring for ransom by landing pages, with the same ransom amount, you can fill in this field by setting the amount and currency - RUB (Russian ruble). In this case, the data will be taken not from the received postback, but from this field.

1. Companies. Go to the section Companies - Create a company.
   • Name of the company. In this field, enter any company name;
2. * Traffic source. Select the traffic source created in step 1 from the drop-down list.
3. * Cost model. Here you can specify the model of buying your traffic from your source, as well as the cost of costs. This will allow the tracker to track how much you spent at the source on your traffic.

1. * Landing page. At this point, you need to check the Direct link box.
2. * Offer. Click the Offer button and select the offer that was created in step 2.

Below you will find a link, which is used to send traffic from your source to the tracker.

1. In the settings of the stream in the system by which you are going to send traffic, in the PostBack URL field, you must specify the postback - http://ykgnm.ab4all.com/trackpixel/track?tid= {sub_id }&amt= {income}.

The setup is complete.

KeitaroTDS

Since version 7.3, integration with our system has been carried out, and the whole process has been simplified to a minimum.

1. When editing a campaign in KeitaroTDS, go to the Postback section.

2. From the selector menu, select Juddy.biz.

3. Following the instructions, copy the Postback URL and add it to the PostBack URL form in our system.

Integration is complete.

PeerClick

Steps to set up PeerClick for Juddy:

1. Add Juddy.biz as an affiliate network to PeerClick.

In your Peerclick account, go to the Affiliate Networks section and click the "Create New" button. The Juddy.biz PP is already listed as a trusted source, so just select it and click add. The data will be filled in automatically, including the clickid macro. Copy the postback URL and click New Affiliate Network.

1. Create a Feed in Juddy.biz and add a ready-made postback link, then create a rotator.
2. Create an offer in PeerClick.

Copy the rotator link from Juddy, then go to the Offers section in PeerClick and click "Create New". Paste the rotator link and fill in all the required details. Select Juddy.biz from the Affiliate Network submenu. The clickID macro will be added to the offer link automatically, so you don't have to enter it manually. Click "Save".

1. Create a campaign in PeerClick.

Go to the Campaigns section and click the Create button. Then give the name of the campaign. If you are using pre-landing page hosted on the affiliate program side, then check the "Direct link" box. If you plan to use your own pre-landing, which is on your hosting, then click + Pre-land. Pre-add the pre-landing in the same way as you added the offer, specifying that all redirect links from the pre-landing to the offer must be replaced in the pre-landing code with a link of the form: http://674097868.peerclicktrk.com/offer. The link is taken when adding a landing page to the tracker.

If there are more than 1 offers on the pre-landing page, then use the second link: http://674097868.peerclicktrk.com/offer/N indicating the offer position instead of N. The position is calculated from top to bottom in the campaign settings.

1. Add the offer you made in step 3.

Select a traffic source and other necessary options, then click "Create and Close".

Setting up is complete, use the link from the campaign in your promotional materials.